Technical Specifications Communication Interface: Industrial communication port Power Supply: Powered by rack backplane Operating Temperature: 0℃ ~ +60℃ Mounting: 3500 rack slot mounting Housing: Metal rack card casing
Functional Features Bi-directional protocol conversion for 3500 rack and external control system. Upload vibration, displacement, temperature, speed and alarm status. Support read-back of rack module health and fault information. Built-in communication link fault monitoring function. Hot swappable for online maintenance. LED indicators for module operation and communication link status.
Application Scenarios Gateway for data exchange between 3500 protection rack and DCS. Power plant turbine and generator set monitoring data transmission. Petrochemical compressor protection system data uploading to control room. Connection of critical rotating machinery monitoring system with PLC and SCADA. Remote central monitoring of heavy industrial rotating equipment.
Performance Parameters Data transmission cycle: Configurable update rate Anti-interference: Metal housing reduces electromagnetic noise Diagnosis: Real-time detection of communication interruption
Structural Characteristics Standard rack card metal casing. Internal protocol conversion processor and communication interface circuit. Backplane connector for power and rack data communication. Front panel communication terminals and LED status indicators. Front panel locking structure.
Working Principle The module collects all measurement data and alarm status from rack backplane. The internal processor converts proprietary rack bus data into standard industrial protocol. The data is transmitted to upper control system, and the module continuously monitors communication link health and reports faults.
Installation Requirements Insert module into specified slot of 3500 rack and lock front panel. Confirm backplane connector fully contacts rack backplane. Connect shielded communication cable to front panel port. Set station address and communication parameters in system configuration tool. Check communication indicators after power on.
There are no reviews yet.