Technical Specifications Multi‑channel analog output, signal range 4‑20 mA. Back‑plane controller bus interface. Auxiliary power 24 V DC, typical power consumption 3.6 W. Operating temperature 0 ℃ to +60 ℃, storage temperature ‑40 ℃ to +85 ℃, non‑condensing relative humidity 5%‑95%. Channel‑to‑bus galvanic isolation.
Functional Features Receives digital set‑point values from DCS controller via back‑plane bus. Converts digital data into 4‑20 mA analog current output for field control devices. Front‑panel LED displays module running and fault status. Built‑in hardware self‑diagnosis detects output loop short‑circuit and internal circuit faults.
Application Scenarios Analog output spare part for ABB Advant DCS system. Applied in power plant and chemical plant legacy process control cabinet maintenance.
Performance Parameters High‑precision digital‑to‑analog conversion. Stable analog current driving capability. Accurate output loop fault detection.
Material Composition Flame‑retardant plastic module housing. Multilayer glass‑fiber epoxy printed circuit board. Digital‑analog conversion, signal isolation and driving assemblies. Back‑plane plug‑in connector and field signal terminals.
Structural Characteristics Standard rack plug‑in module. Front side fitted with field analog output terminals and status LED indicators. Rear side equipped with back‑plane bus connector. Weight approximately 0.35 kg.
Working Principle Digital control value transmitted from controller enters DSAO130A through back‑plane bus. Internal digital‑analog conversion circuit generates corresponding analog current signal and sends to field actuator. Diagnosis circuit continuously monitors output loop load condition and module hardware state.
Installation Requirements Cut off rack auxiliary power before replacement. Insert DSAO130A into corresponding rack slot and lock fixing latch. Connect field actuator wiring to front‑end signal terminals. Ensure back‑plane connector is fully engaged. Restore power supply, calibrate analog channels and verify output signal accuracy.
Usage Notes Prevent analog output channel short‑circuit. Confirm field load impedance matches module specification. Hot‑plug under powered state is forbidden. Complete output accuracy calibration after module replacement.
There are no reviews yet.