Technical Specifications User Memory:128KB program memory, 128KB data memory Logic Execution Speed:0.4μs per boolean instruction Built‑in Port:1×RS485 serial port Maximum I/O Support:4096 I/O points Backplane Power Consumption:440mA @5VDC Isolation Voltage:1500V RMS Operating Temperature:0℃～+60℃ Storage Temperature:-40℃～+85℃ Relative Humidity:5%‑95%, non‑condensing Certifications:CE, UL, cUL
Functional Features FE pre‑loaded firmware, high‑speed logic execution, large‑capacity I/O management, built‑in serial communication interface, comprehensive system fault logging, online program monitoring and modification, support multi‑rack expansion architecture.
Application Scenarios Large‑scale Series 90‑70 process control system, legacy heavy‑duty automation equipment, spare replacement for FE‑configured CPU hardware.
Performance Parameters Deterministic PLC scan cycle Non‑volatile fault event storage Shock & vibration:Comply with IEC 60068
Structural Characteristics Standard Series 90‑70 plug‑in rack module Front‑panel multi‑color LED indicators for run, fault and status RS485 serial communication terminal Backplane gold‑finger bus contact Internal high‑performance processor and memory chip assembly with FE firmware Mechanical locking latch
Working Principle In each scan cycle, CPU refreshes I/O image table via Series 90‑70 backplane bus. Executes user logic program stored in internal memory. Output computed control commands to I/O modules. Built‑in RS485 port serves for programming and device communication. FE firmware defines factory preset operating parameters. Fault and alarm events are stored inside non‑volatile memory.
Installation Requirements Insert module into dedicated CPU slot of Series 90‑70 main chassis. Complete cabinet protective grounding. Configure serial communication parameters through programming software. Power‑off rack before module replacement. Ensure cabinet ventilation and heat dissipation condition.
Usage Notes Total configured I/O points shall not exceed maximum 4096 limit. Back‑up user program and configuration files regularly. Analyze LED indicator and fault log during system troubleshooting. On‑site disassembly is prohibited. Avoid corrosive gas and liquid splash.
There are no reviews yet.