Technical Specifications
Protocol supported is PROFINET Slave Version 2.2 Class A IO-Device. Maximum modules per station are 8 and not expandable via racks. Power consumption is 3 W. Operating temperature is 0°C to 60°C. Physical dimensions are height 132 mm, width 134 mm, and depth 5.2 mm. Weight is 410 g.
Functional Features
Supports redundant power supplies with optional second power supply. Hot swap capability allows replacement of a de-energized redundant power supply. Standard PROFINET alarm and diagnostics reporting. Supports Classless InterDomain Routing (CIDR) with subnetting and supernetting. Daisy-chain, star, or ring topology support. Media Redundancy Protocol (MRP) client mode operation. Integrated USB 2.0 port for firmware upgrades.
Application Scenarios
Chemical processing, oil and gas refining, power generation, water and wastewater treatment, pulp and paper, food and beverage, and any industrial automation requiring PROFINET remote I/O connectivity.
Performance Parameters
10/100 Mbps Ethernet data rate supports standard industrial communication. 1440 bytes each direction provides substantial I/O data capacity. Deterministic data exchange maintains control system timing requirements.
Material Composition
Industrial-grade housing with integrated Ethernet magnetics, dual RJ45 connectors, and PROFINET protocol processor.
Structural Characteristics
Compact module with two RJ-45 Ethernet ports on the front face. Redundant power supply support. USB port for firmware maintenance. Compatible with RX3i PLC CPUs and Proficy Machine Edition software.
Working Principle
The scanner continuously polls connected VersaMax I/O modules via the backplane, maps I/O data to PROFINET exchange buffers, and communicates with the IO-Controller at the configured production period.
Installation Requirements
Mount on VersaMax carrier or compatible base. Connect to Ethernet network via standard CAT5e or better cables. Configure IP address and network parameters through programming software.
Usage Precautions
Use shielded Ethernet cables in industrial environments. The USB port is for firmware upgrades only and not intended for permanent connection. Ensure network switch supports required data throughput.
There are no reviews yet.