GE IC200MDL742 VersaMax 16-Point 24 VDC Positive Logic Discrete Output Module with ESCP

Output channels are 16 discrete sourcing outputs. Output voltage is 18-30 VDC with 24 VDC nominal. Maximum output current is 0.5 A per point and 4 A per group. Groups are 2 isolated groups of 8 points each. Group-to-group isolation is 250 VAC continuous and 1500 VAC for one minute.External power supply is 18-30 VDC. Backplane current is 150 mA typical at 5V. Dimensions are 110 mm x 66.8 mm x 50 mm.

Electronic short-circuit and overcurrent protection improve system reliability. Free-wheeling diodes safeguard against inductive load transients. Two isolated groups provide flexible wiring. LED indicators for each output simplify diagnostics. Built-in protection generates fault signals for overload conditions.

Factory automation, material handling, packaging systems, process control, relay and solenoid driving, and applications requiring protected outputs.

Less than 0.5 ms response time ensures precise output switching. 0.5 A per point with 4 A per group supports substantial loads. Electronic protection latches until cleared by command or power cycle.

Industrial housing with protected output circuitry and isolation barriers between groups.

Two isolated groups of eight outputs. LED indicators for each point plus OK and FLD PWR LEDs. Compact single-slot design.

Output data from the CPU controls solid-state switches. Protection circuits monitor current per point, latching off outputs that exceed current limits. Free-wheeling diodes clamp inductive kickback.

Mount on VersaMax carrier. Connect external 24 VDC supply. Group wiring must respect isolation boundaries between the two output groups.

Fault conditions latch and remain until cleared. Verify load current does not exceed 0.5 A per point. Use proper suppression for highly inductive loads. Check amber fault LEDs for overload indication.