Technical Specifications Input Signal Type: 4‑20 mA DC current analog signal Input Current Range: 0‑24 mA DC Input Burden Resistance: 250 Ω typical value Channel‑by‑channel Isolation Voltage: 500 V RMS per channel Transient Surge Suppression: 1500 V Operating Power Supply: 24 VDC from system backplane bus Communication Protocol: Proprietary 2 Mbps HDLC fieldbus for I/A Series system Operating Temperature: ‑40 ℃ to +70 ℃ Storage Temperature: ‑50 ℃ to +85 ℃ Relative Humidity: 5%‑95%, non‑condensing Mechanical Dimension: Standard single‑slot plug‑in module for Foxboro I/A Series rack Certifications: CE, UL, ATEX, IEC 61508 functional safety compliance
Functional Features Supports multi‑channel 4‑20mA analog current signal acquisition with per‑channel galvanic isolation. Provides hardware filtering to suppress industrial electromagnetic interference. Each channel implements independent field‑side electrical isolation. 
Application Scenarios Process industry distributed control system (DCS). Petrochemical plant multi‑ground‑potential transmitter signal acquisition. Oil & gas site heavy‑interference analog signal monitoring loops.
Structural Characteristics Standard single‑slot plug‑in structure matching Foxboro I/A Series rack. Front panel with status indicator LED lamps for power, channel fault and fieldbus communication. Field signal terminals located at module front side for wiring maintenance. Backplane golden finger interface for internal system fieldbus connection.
Working Principle Field 4‑20mA current signals enter through terminal connectors. Hardware filter circuits eliminate high‑frequency interference signals. Every channel adopts independent isolation unit to complete electrical isolation between field circuit and internal logic circuit, eliminating ground‑loop cross‑interference. Precision sampling resistance converts current signal into voltage signal for analog‑digital conversion. Processed digital measurement data is transmitted to main control processor via HDLC fieldbus.
Installation Requirements Install the module into designated slot of Foxboro I/A Series standard rack. Ensure rack ground connection strictly follows system grounding specification. Field signal wiring must use shielded twisted‑pair cables. Separate power cable and signal cable routing to avoid crosstalk.
There are no reviews yet.