Technical Specifications Input Signal Type: 4‑20 mA DC current analog signal Input Current Range: 0‑24 mA DC Input Burden Resistance: 250 Ω typical value Channel Isolation Voltage: 500 V RMS Transient Surge Suppression: 1500 V Operating Power Supply: 24 VDC from system backplane bus Communication Protocol: Proprietary 2 Mbps HDLC fieldbus for I/A Series system Operating Temperature: ‑40 ℃ to +70 ℃ Storage Temperature: ‑50 ℃ to +85 ℃ Relative Humidity: 5%‑95%, non‑condensing Mechanical Dimension: Standard single‑slot plug‑in module for Foxboro I/A Series rack Certifications: CE, UL, ATEX, IEC 61508 functional safety compliance
Functional Features Supports multi‑channel 4‑20mA standard analog current signal acquisition. Provides hardware filtering to suppress industrial electromagnetic interference. Channel‑to‑channel and field‑to‑backplane galvanic isolation. Built‑in comprehensive self‑diagnosis for loop open‑circuit, over‑current, power supply and internal circuit faults. Supports hot‑swap operation under system running status. Real‑time fault alarm and status reporting to host control processor. 
Application Scenarios Process industry distributed control system (DCS). Oil & gas and petrochemical plant transmitter signal acquisition. Flow, pressure, liquid level transmitter signal input. Chemical plant process parameter monitoring loops. Power plant auxiliary process analog signal collection. General manufacturing industry analog measurement control loops.
Structural Characteristics Standard single‑slot plug‑in structure matching Foxboro I/A Series rack. Front panel with status indicator LED lamps for power, channel fault and fieldbus communication. Field signal terminals located at module front side for wiring maintenance.
Working Principle Field 4‑20mA current signals enter through terminal connectors. Hardware filter circuits eliminate high‑frequency interference signals. Isolation circuits complete electrical isolation between field circuit and internal logic circuit. Precision sampling resistance converts current signal into voltage signal for analog‑digital conversion.
Installation Requirements Install the module into designated slot of Foxboro I/A Series standard rack. Ensure rack ground connection strictly follows system grounding specification. Field signal wiring must use shielded twisted‑pair cables.
There are no reviews yet.