Technical Specifications Output Signal Type: 4‑20 mA DC current analog signal Output Current Range: 0‑22 mA DC Maximum Load Resistance: 750 Ω typical value Channel Isolation Voltage: 500 V RMS Transient Surge Suppression: 1500 V Operating Power Supply: 24 VDC from system backplane bus Communication Protocol: Proprietary 2 Mbps HDLC fieldbus for I/A Series system Operating Temperature: ‑40 ℃ to +70 ℃ Storage Temperature: ‑50 ℃ to +85 ℃ Relative Humidity: 5%‑95%, non‑condensing Mechanical Dimension: Standard single‑slot plug‑in module for Foxboro I/A Series rack Certifications: CE, UL, ATEX, IEC 61508 functional safety compliance
Functional Features Supports multi‑channel 4‑20mA standard analog current signal output. Built‑in short‑circuit protection for each output channel. Provides hardware filtering to suppress industrial electromagnetic interference. Channel‑to‑channel and field‑to‑backplane galvanic isolation. Built‑in comprehensive self‑diagnosis for output short‑circuit, open‑load, power supply and internal circuit faults. Supports hot‑swap operation under system running status. Real‑time fault alarm and status reporting to host control processor. Supports configurable output range scaling via system configuration tool.
Application Scenarios Process industry distributed control system (DCS). Petrochemical plant regulating valve analog drive control. Oil & gas site actuator and positioner control loops. Chemical plant flow, pressure closed‑loop adjustment control. 
Structural Characteristics Standard single‑slot plug‑in structure matching Foxboro I/A Series rack. Front panel with status indicator LED lamps for power, channel fault and fieldbus communication. Field signal terminals located at module front side for wiring maintenance.
Working Principle Digital control commands transmitted from main processor arrive via backplane HDLC fieldbus. Internal digital‑analog conversion circuit converts digital control value into analog reference signal. Precision current output circuit generates stable 4‑20mA current signal to field actuators.
Installation Requirements Install the module into designated slot of Foxboro I/A Series standard rack. Ensure rack ground connection strictly follows system grounding specification.
There are no reviews yet.