GE IC693ALG223-GB

• Analog Outputs:
  • Number of Channels: 2
  • Output Signal Types: ±10 VDC, 0 to 10 VDC, 4 to 20 mA, 0 to 20 mA
  • Output Drive: 0 to 20 mA into 500 Ω maximum (current), ±10 V into 1 kΩ minimum (voltage)
  • Resolution: 12 bits
  • Update Time: 1.0 ms per channel
  • Accuracy: ±0.25% of full scale at 25°C
• Isolation: Optical isolation between field side and backplane (2500 VAC continuous)
• Data Format:
  • Inputs: 16-bit signed binary
  • Outputs: 12-bit binary
• Backplane Current Draw: 200 mA at 5 VDC, 50 mA at 24 VDC
• Power Dissipation: 1.8 Watts
• Operating Temperature: 0°C to 60°C (32°F to 140°F)
• Storage Temperature: -40°C to 85°C (-40°F to 185°F)
• Humidity: 5% to 95% relative humidity, non-condensing
• Status Indicators: LED for power, run, and fault status

Functional Features:

• Combines 4 analog inputs and 2 analog outputs in a single module, optimizing rack space.
• Supports multiple input and output signal types, configurable per channel via software.
• High-resolution 16-bit A/D conversion for precise analog signal acquisition.
• 12-bit D/A conversion for accurate analog output control.
• Each channel is electrically isolated to minimize noise and prevent ground loops.
• Configurable scaling allows direct mapping of raw values to engineering units (e.g., temperature, pressure, flow).
• Built-in diagnostics for open circuit detection (outputs) and out-of-range monitoring (inputs).
• Compatible with standard industrial sensors and actuators including transmitters, valves, and drives.
• Designed for integration with GE Series 90-30 CPU units and baseplates.
• Supports hot-swap capability in systems with redundant power and configuration support.
• Works with Proficy Machine Edition and Logicmaster for setup, calibration, and monitoring.

Applications:

• Process control systems in chemical, pharmaceutical, and food and beverage industries.
• Closed-loop control of temperature, pressure, and flow using PID regulation.
• Data acquisition and control in oil and gas production and refining.
• Machine automation requiring real-time feedback and actuator control.
• HVAC and environmental control systems in commercial and industrial facilities.
• Water and wastewater treatment plants for monitoring and regulating process variables.
• Integration into test stands and calibration systems requiring simultaneous input and output operations.

Compatibility:

• Designed for use with GE Fanuc Series 90-30 PLC systems.
• Mounts on standard 5-slot or 10-slot baseplates (e.g., IC693CHS397, IC693CHS392).
• Compatible with Series 90-30 CPUs such as IC676PBI008-EA.
• Configurable using Proficy Machine Edition, Logicmaster, or other GE automation software tools.

Physical Dimensions:

• Width: 115 mm (4.5 inches)
• Height: 110 mm (4.3 inches)
• Depth: 130 mm (5.1 inches)
• Weight: Approximately 0.65 kg (1.4 lbs)

Certifications:

• CE Marked
• UL Listed
• CSA Certified
• Complies with industrial electromagnetic compatibility (EMC) and safety standards