GE IC670MDL740K

Technical Specifications

• Output Signal Voltage: 10 – 30 VDC.
• Nominal Voltage: 24 VDC.
• User Output Current: 0.5 A per point.
• Current Consumption from BIU Power Supply: 111 mA.
• Surge Current: 2 A, maximum duration 100 ms.
• Minimum Load Current: 1 mA per point.
• Output Voltage Drop: 0.5 V.
• Output Leakage Current at 0 VDC: 5 – 30 mA.
• Response Time: Typical response time for on and off signal conversion.
• Terminal Block: Integrated terminal block with 25 terminals, suitable for AWG #14 – AWG #22 wire or two AWG #22 wires. After installing an external jumper, the allowable wire size is reduced to AWG #14 – AWG #16.

Functional Features

• Status Indication: It has individual status LED indicators for each output channel, showing the on/off state of the module’s output channels. There is also a common fuse for the entire I/O group, with an associated LED indicator to show the fuse – blown status.
• Over – current Protection: The module’s fuse can protect the output from external power – polarity errors and excessive current through the output points, and it can also send a fuse – blown diagnostic message to the bus interface unit.
• Source – type Output: The output acts as a source – type output, providing current to the load by switching the load to the positive pole of the DC power supply.

Application Scenarios

• Industrial Automation: It can be used to power output devices such as indicator lights, relay coils, solenoid – driven devices, and similar devices with low – rated current in industrial production lines, such as automotive manufacturing and electronics production.
• Process Control: In industries like chemical, petroleum, and power generation, it is used to control the on/off state of some discrete devices in the process, such as controlling the opening and closing of valves and the operation of small – power pumps.